13.56mhz IC keypad Waterproof Wiegand 26 RFID Card Reader for Security Door access control system
D702A 5 to 10 cm short range 13.56mhz reader with wiegand 26 protocol
Specification
| Output Format Data |
Wiegand 26 bits Standard |
| Response Speed |
Less than 0.2 second |
| Proximity reading Range |
5-10cm |
| Ambient Temperature |
-25º C to 75º C |
| Ambient Humidity |
10%-90% |
| Antenna |
Built-in |
| LED |
Built-in (Double Color LED) |
| Buzzer |
Built-in Loud Speaker |
| Working Voltage |
DC 9V-16V . Standard 12V |
| Working Current |
70mA |
| Communication Distance |
100 Meters |
| Transfer |
Real Time Data |
| Water-Proof |
yes |
| Audiovisual indication |
When a registered card is presented to the reader, the red LED flashes green and the beep sounds. |
| size |
86*8618(mm) |
|
|
Packing List:
1*RFID Reader
100pcs per carton.
Carton Size: 43.5*56*23(cm)
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Orange Door Bell
Grown Door Bell
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
Access control card reader photo
Application: access control system
Photos
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}