| Customization: | Available |
|---|---|
| Type: | ID Card Reader |
| Card Type: | Mifare, EM |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Technical parameters:
|
NO |
Item |
Value |
|
1 |
Operating voltage |
DC 12V±10% |
|
2 |
Operating current |
< 100mA |
|
3 |
Dimensions |
86mm×45mm×12mm |
|
4 |
Weight |
80g |
|
5 |
Relative humidity |
20%-80% |
|
6 |
Storage |
2000users |
|
7 |
Card type (alternative) |
EM(ID) card |
|
8 |
Antenna size optional |
22*22mm or 22*69mm |
|
9 |
Card reading distance |
1-15CM |
2.Wire connection
Red: DC12V
Black:GND
Blue: NO
Yellow:COM
Grey: NC
White :OPEN
3,How to SET Manager Card - MAC&MDC
Step1,Turn off power and connect bin 2&3 of S1.
Step2,Turn on power and buzzer gives 3 long buzz with green light flash fast, now read two empty cards first one as Manager Add Card and Second one as Manager Delete Card with red light flashing .
Step3,Turn off power, disconnect bin2&3 and connect bin 1&2 of S1.
Step4,Turn on power again.
4, How to use Manager Card - MAC&MDC
To add a card user in standby mode: read MAC read new cards read MAC
To delete a card user in standby mode: read MDC read registered cards read MDC
To delete all users in standby mode: read MDC read MAC read MDC
Remark: User cards can be added or deleted continuously.
5,How to change Open time
Connect bin 1&2 of S2:Open time is 5 Secs
Connect bin 2&3 of S2:Open time is 1 Secs
){kind=link}