| Type: | IC Card Reader |
|---|---|
| Card Type: | Mifare, EM |
| Interface: | Wiegand26/Wiegand 34 |
| Reading Distance: | Within 10cm |
| Application: | Hospital, Library, Company, Bank, Store |
| Color: | Black |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Multi-frequency RFID Reader with 125KHz and 13.56MHz combi frequency
Specification
Less than 0.2 second Response SpeedLess than 0.5 seconds Proximity Time Distance2-15cm Proximity RangeSupport 13.56Mhz MF ISO14443ABuilt-in AntennaBuilt-in LED (Double Color LED)Built-in Loud Speaker (Buzzer)DC 12V Working Voltage,70mA Working Current100 Meters Communication DistanceReal Time Data TransferBlack ColorPVC Case Material (Black Resin for Water-Proof Function)76*114mm*16mm
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 12V
Black GND
Green D0
White D1
Blue LED
Yellow Beep
Grey WG34 ( if you need wiegand 34 output , kindly connect the grey cable to GND)
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Packing list for RFID Reader
1* RFID Reader
1* User Manual
1*Gift Box
Remind:
1.The package not including any screws .
2.This reader not support NFC cards and tags .
Application
Certification
Wire diagram
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}