Customization: | Available |
---|---|
Type: | Access Control Reader |
Usage: | Door |
Still deciding? Get samples of US$ 14/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
13.56mhz rfid reader wiegand 26 for door access control system supports external door bell
specification
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 12V
Black GND
Green D0
White D1
Blue LED
Yellow speaker
Brown Door bell
Grey Door bell
Remind: Door bell not including in the package ,this reader not support NFC cards.
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires
Package
1 Rfid reader per box
100pcs per carton.
Carton Size: 43.5*56*23(cm)
Access control card reader photo
Application
Certification