Low Cost 125kHz 13.56MHz RFID Reader Card Access System

• Customization: Available
• Type: ID Card Reader
• Card Type: Mifare, EM
• Model NO.: D1003A
• Interface: Wiegand 26 Wiegand 34
• Reading Distance: Within 10cm
• Application: Parking, Hospital, Library, Company, Bank, Store
• Color: Black or White
• Door Control: One Door
• Warranty: 1 Year
• Frequency: 125kHz or 13.56MHz
• Communication: TCP IP
• Transport Package: 1 PCS Smart Card Reader Per Gift Box
• Specification: 88*88*20mm
• Trademark: Dwell
• Origin: Shenzhen China
• HS Code: 8471900090
• Production Capacity: 10000 PCS Per Month

Product Description

 125khz em id wiegand 26 keypad access control rfid smart card reader

 

 Product Description
 

D1003A  5 to 10 cm short range 125 KHz  reader with wiegand 26, wiegand 34 protocol

 

Specification 

Wiegand 26bits/ Wiegand34bits Standard Format Data Output 

Less than 0.2 second Response Speed 

5-10cm Proximity Range 

Ambient Temperature: -25º C to 75º C 

Ambient Humidity: 10%-90% 

Built-in Antenna 

Built-in LED (Double Color LED) 

Built-in Loud Speaker (Buzzer) 

DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current 

100 Meters Communication Distance 

Real Time Data Transfer 

With Water-Proof Function 

Audiovisual indication: When a registered card is presented to the reader, the red 

LED flashes green and the beep sounds. 

88*88*20(mm) 
 

 

Packing List:

1*RFID Reader

100pcs per carton. Carton Size: 43.5*56*23(cm) 

 

Installation Description

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

 

Wire Connection

Red DC 9V to 16V

Black GND

Green D0

White D1

Yellow BEEP

Blue   LED

Grey  Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)

Orange  Door Bell

Grown   Door Bell

 

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

Photo



Application


Wire diagram