| Type: | ID Card Reader |
|---|---|
| Card Type: | EM |
| Reading Distance: | 1-5m |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Control Card Readers Wiegand 26 rf gate access control card rfid reader 125khz
D101A 2 to 10 cm short range 125 KHz reader with wiegand 26, wiegand 34 protocol
Optional Model:
D101A-26/34, (Black Color, wiegand 26/34 interface)
Specification
*Wiegand 26bits/ Wiegand34bits Standard Format Data Output
*Less than 0.2 second Response Speed
*5-10cm Proximity Range
*Ambient Temperature:-25ºC to 75ºC
*Ambient Humidity: 10%-90%
*Built-in Antenna
*Built-in LED (Double Color LED)
*Built-in Loud Speaker (Buzzer)
*DC 9V-16V Working Voltage. Standard 12V, 70mA Working Current
*100 Meters Communication Distance
*Real Time Data Transfer
*With Water-Proof Function
*Audiovisual indication: When a registered card is presented to the reader, the re
LED flashes green and the beep sounds.
*102*43*16(mm)
Package:
1 * RFID reader
1* User manual l
1* Gift box
Installation Description
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 9V to 16V
Black GND
Green D0
White D1
Yellow BEEP
Blue LED
Grey Wiegand 26/Wiegand 34( defualt is Wiegand 26 bits, if you need weigand 34 function , connect Grey wire to GND)
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
RFID READER PHOTO
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}